Key Features:

• IP Input (UDP or RTP): Supports multicast or unicast streams, handling both SPTS and MPTS formats. Convert these streams to DVB-ASI in passthrough mode or modify them by adjusting PIDs or VCT. Individual streams within an MPTS can be removed as needed.
• ASI Input: Handles both SPTS and MPTS streams. Convert MPTS ASI streams to IP MPTS streams, or transform each TS into its own SPTS IP stream. Modify each TS by adjusting PIDs or VCT, and decode to baseband video as SDI, HDMI, and analog audio.
• ATSC RF Tuner: Tune to any frequency and convert scanned off-air content to ASI or IP.

The unit supports single conversions at a time, such as ASI to IP or IP to ASI, but not both simultaneously. It is ideal for a range of broadcast and streaming applications, offering flexible solutions for ASI/IP and RF-based needs.

Applications and Conversions:

• ASI (SPTS) to IP converter
• ASI to SDI or HDMI converter/decoder
• ASI to SDI or HDMI with analog audio
• ASI (MPTS) to IP (MPTS) converter
• IP input (MPTS) to ASI output (MPTS) or SPTS with muxing functionality
• IP (SPTS) to ASI (SPTS)
• IP (MPTS or SPTS) to SDI or HDMI
• IP to SDI or HDMI with analog audio
• RF Input (ATSC-8VSB) to ASI, IP, and SDI simultaneously, with MPTS mux capabilities allowing PID and VCT modifications

Inputs and Outputs:

• Inputs: IP UDP Multicast/Unicast, DVB-ASI, ATSC RF
• Outputs: ASI for MPEG transport streams, IP for network distribution, and decoder video formats including SDI, HDMI, YPbPr, and CVBS

Please note that the unit can perform ASI-to-IP, IP-to-ASI, or RF (ATSC-8VSB) to IP/ASI conversion, but not simultaneously. The input must be selected as ASI, IP, or RF. If ASI input is chosen, the output will be IP (UDP unicast or multicast), with an ASI output available for transport stream modifications. For example, if an ASI MPTS contains three multiplexed TS streams and one is removed, the output will be a single IP MPTS with two TS streams, or two IP streams (SMPTS), along with an ASI MPTS with two TS streams. The same scenario applies in the opposite direction, from IP to ASI. If RF input is selected, the output will include both IP and ASI. Each individual TS from any source—ASI, IP, or RF—can be selected and decoded to SDI, HDMI, and CVBS simultaneously.

Model: H-IP-ASI-B-V3

Experience seamless conversion and decoding with the H-IP-ASI-B-V3, perfect for your broadcast and streaming needs.

<p>The post Thor ASI to IP and IP to ASI converted with decoding to SDI and HDMI first appeared on HDMIRFModulators.com.</p>

Model: H-IP-4ASI

LIN: 286

<p>The post Thor 32 IPTV TS’s INPUT TO 4 ASI OUTPUT first appeared on HDMIRFModulators.com.</p>

Model: H-HDMI-DA

LIN: 1118

Upgrade your HDMI connections with the Thor H-HDMI-DA for reliable and extended performance.

<p>The post Thor HDMI Repeater amplifier with HDCP first appeared on HDMIRFModulators.com.</p>

This splitter supports DVB-ASI signals at any bitrate, ensuring minimal jitter and clean output signals for extended transmission distances. Its plug-and-play design requires no management, making it easy to integrate into existing systems.

Typical applications include headend signal distribution, broadcast facilities, signal testing and monitoring, and redundant system feeds. It’s ideal for broadcasters, cable operators, satellite uplinks, IPTV headends, and government or enterprise video transport systems.

Model: H-ASI-AMP

<p>The post Thor 1×16 DVB ASI Splitter and Distribution Amplifier first appeared on HDMIRFModulators.com.</p>

Featuring dual inputs and a single output, the switch designates one input as the primary channel and the other for backup. If the primary channel’s signal drops below a preset level, the switch automatically transfers to the backup channel. You can also manually switch channels via the front control panel or remotely using Ethernet SNMP. Enjoy full remote management for easy system parameter adjustments and monitoring.

Model: H-RF-SWITCH

Ensure uninterrupted signal flow with this versatile RF redundancy switch.

<p>The post Thor 1-1000Mhz RF Redundancy Switch first appeared on HDMIRFModulators.com.</p>

Model: H-HDMI-SDI

LIN: 244

<p>The post Thor HDMI to 3G HD/SD- SDI Converter first appeared on HDMIRFModulators.com.</p>

Model: H-SDI-HDMI

<p>The post Thor SDI to HDMI Mini converter first appeared on HDMIRFModulators.com.</p>

Thor Broadcast’s technology ensures high performance in transferring MPEG transport streams through IP networks. The H-1 ASI to IP system simplifies the traditionally complex and costly setup of DVB-ASI video transport links between broadcasting locations. By acting as an ASI over IP encapsulator, it allows MPEG transport streams to be transmitted over packet-based networks, often utilizing wireless equipment for added flexibility.

This gateway supports bi-directional transport, capable of carrying multiple DVB ASI Transport Streams within the same IP pipe. It offers an effective solution for your MPEG2 transport over IP needs. For assistance, contact our expert staff at (800) 521-8467 ext 2 for support with our IP to ASI and ASI to IP services. ASI to IP Management software is also available.

Model: H-ASI-IP-B

Whether you need an ASI to IP converter, IP to ASI converter, or a media converter for ASI, this gateway provides a reliable and efficient solution.

<p>The post Thor DVB ASI Over IP Gateway first appeared on HDMIRFModulators.com.</p>